Esp-01s 5v Wifi Módulo De Relé Transmisor Receptor Esp8266

Descripción

Description:
Product Size: 45 * 28mm
Working voltage: DC5V
Communication to WIFI ESP8266 module
Serial communication parameters: 9600.8, 1.0, 0
Transmission distance: maximum transmission distance 400 m (open environment, mobile phone equipped with WIFI module)
Load: 10A / 250VAC 10A / 30VDC, relay pull 100,000 times
Way of working:
Mobile phone equipped with WiFi module;
Cellular phone and WiFI module with the same router, through the APP phone to control the relay; this mode, the transmission distance depends on the router signal.
Tips:
The ESP8266 module has a timeout mechanism, when the phone for a certain time (default 180 S) did not give instructions to the module, the module will reset the phone, the computer can send AT + CIPSTO = <> time change this time ( Time range 0-7200), such as: AT + CIPSTO = 3600.
When the module on the WIFI module is disconnected, USB to the module of the TTL RX, TX, GND pin have been connected to the RX, TX, GND pin, IN +, IN-5 V supply module, then the module can be Used as a USB Relay to use, scalability.

Note: this item is without ESP8266 Board
Shipping List:
1PC*DC 5V Relay Module
ESP8266 ESP-01S

Description:
Wireless Standard:802.11b/g/n
Frequency Range:2.4GHz-2.5GHz(2400M-2483.5M)
Data Interface:UART/HSPI/I2C/I2S/Ir Remote Control/GPIO/PWM
Operating Voltage:3.0-3.6V(We recommended 3.3V)
Operating Current:Average 80mA
Operating Temperature:-40~125?
Wireless Network Mode:station/softAP/SoftAP+station
Safety Mode:WPA/WPA2
Encryption Type:WEP/TKIP/AES
Network Protocol:IPV4,TCP/UDP/http/FTP

Shipping List:
1PC*ESP-01S ESP8266 Serial to Wifi Wireless Transparent Transmission Module