Módulo De Frecuencia Del Amplificador Fm Hf Vhf/uhf Rf 0.05-

Descripción

Specification:
Certification: NONE
Origin: Mainland China
DIY Supplies: ELECTRICAL
Display Type: Analog Only
Model Number: RF Amplifier Module
Dimensions: 52 x 23 x 6mm/2.0 x 0.9 x 0.2inch
Voltage: 5V
Current: 90mA
Gain: 18dB AT 0.9G 
Input/output impedance: 50
Max. Output power: P1db 22dBm (AT 2GHz)
Input Signal: <+10dBm (down to -110dBm. If input >+10dBm, output distortion)
Bandwidth: 0.05-4GHZ (varies at different frequencies, refer to S21 curve)
Noise figure: 0.6dB AT 0.9GHz
Product features:
1. This is an ultra low noise, high linearity low noise amplifier module.
2. It has a typical noise factor of 0.6dB, a typical gain of 19dB and a P1dB of 23dB.
3. It can be used in high dynamic range receiver LNA applications and amplifies small signals up to 110dBM.
4. You can cascade multiple LNA modules to increase gain.
5. Typically used in HF or IF preamplifiers for radio receivers, high sensitivity amplification circuits for electronic detection equipment, as well as transceiver wireless communication cards, tower top amplifiers (TMA), combiners, repeaters and remote/digital wireless broadband head units.

Note:
Due to the different monitor and light effect, the actual color of the item might be slightly different from the color showed on the pictures. Thank you!
Please allow 1-2cm measuring deviation due to manual measurement.

Included:
1 x RF Amplifier Module